
Precision to meet an achiever's demand
Signature ceramic total hip replacement system boasts credible clinical heritage bearing technologies that are proven for more than 12 years.
Created with the world's best technologies and materials, Signature Ceramtec heads are imported straight from the best manufacturer in the world, Cermatec Germany. Acetabular cup design is successfully tested for over 15 years. Stem design in existence since more than 25 years.
(CE2195 Certified Product)

Stem
Material Specs: Forged Ti6AL4V ELI (Extra Low Interstitials)
150 +/ – 50 microns induces rapid osteointegration.

Stem length, head offset & neck length in mm
* Note: Head offset mentioned is for sizes (mm): 28, 32, 36 (0)

Acetabular Cup
Material space: Forged Ti6AL4V ELI (Extra Low Interstitials)

Liner
Material space: Highly cross linked polyethylene (XLPE), minimizes wear & increases durability


Signature BioloxR Delta Head
Material space: Fourth generation advanced ceramic
BIOLOXR delta, the only ceramic with 11 years of successful clinical experience & with more than 5 million implanted components.

Femoral Metal Head
Material space: CoCrMo alloy
Signature Bipolar
Material space: CoCr with highly cross linked polyethylene
For OD: 37 – 43 = 22.2 (-2.5, 0, +2.5)
For OD: 45 – 53 = 28 (-4, 0, +4)
(2mm increments in OD)

Bone Screw
Material space: Forged Ti6AL4V ELI (Extra Low Interstitials)
Diameter: 6.5 ø

Case References For Signature Hip System
Case 1: Signature in AVN-LT Hip
Age: 32, Male.
Diagnosis: AVN-Lt Hip
Operative Done: Total Hip Replacement for AVN-Lt Hip
Implant Used: Uncemented stem sz.3, Cup & Liner sz.56, Metal Head sz.36 (O) with 20mm Bone Screw

PER-OP

POST-OP
Case 2: Signature in Bilateral Protrusio Acetabuli
Age: 40, Male.
Diagnosis: Bilateral Protusio Acetabuli
Operative Done: Bilteral Total Hip Replacement
Implant Used: Each side acetabular cup 44 mm, Material Head 28 (-4), Stem sz.2 with bone screw

PER-OP

POST-OP